Differences

This shows you the differences between two versions of the page.

--- code:json [2016/11/28 01:35] – added information on a couple more commands jtello
+++ code:json [Unknown date] (current) – external edit (Unknown date) 127.0.0.1
@@ Line 3: / Line 3: @@
 |change_constraints|change_script|[[#cmd]]|cnst_alt|cnst_alt_v|
-|cnst_time|consts|create_target|dec|devbytype|
+|cnst_time|consts|create_target|dec|[[#devbytype]]|
-|deviceinfo|[[#devices]]|executor|expose|get|
+|deviceinfo|[[#devices]]|executor|expose|[[#status|get]]|
-|hasimage|inc|labellist|labels|lastimage|
+|hasimage|inc|labellist|labels|[[#lastimage]]|
-|messages|night|obytid|plan|runscript|
+|messages|night|obytid|plan|[[#runscript]]|
-|satisfied|script|selval|[[#set]]|status|
+|satisfied|script|selval|[[#set]]|[[#status]]|
 |sunalt|taltitudes|tbydistance|tbyid|tbylabel|
 |tbyname|tbystring|tlabs_add|tlabs_delete|tlabs_set|
 |[[#update_target]]|violated|
+Info about them can be figured out from the relevant code:
+[[https://github.com/RTS2/rts2/blob/master/src/httpd/httpd.cpp|httpd.cpp]] and [[https://github.com/RTS2/rts2/blob/master/src/httpd/api.cpp|api.cpp]]
+[[https://github.com/RTS2/rts2/blob/master/python/rts2/json.py|json.py]], this last one being the most informative
 ====== cmd ======
@@ Line 20: / Line 23: @@
 note the URL code %20 is used to pass on the space between the command and the parameters.
+====== devbytype ======
+This will list the devices by type with the modifier being an interger t:
+for example:
+  http://observatoryserver/apipath/devbytype?t=2
+will output mounts attached to this rts2 instance.
+Where the differt device types are:
+|1|SERVERD|9|GRB|21|IMGPROC|
+|2|MOUNT|10|FOCUS|22|SELECTOR|
+|3|CCD|11|MIRROR|23|XMLRPC|
+|4|DOME|12|CUPOLA|24|INDI|
+|5|WEATHER|13|FW|25|LOGD|
+|6|ROTATOR|14|AUGERSH|26|SCRIPTOR|
+|7|PHOT|15|SENSOR| | |
+|8|PLAN|20|EXECUTOR| | |
 ====== devices ======
 This will list the devices connected to rts2
+====== lastimage ======
+This theoretically tells you which was the last image to be taken. Using the modifier 'ccd'
+However if this fails (claims not a single image has been taken)
+Looking at the status of the camera device will often state the last_image as a value.
+====== runscript ======
+Will run script.
+Example: runscript?d=C0&s=E%201
+(in this case the script has a space which is replaced with '%20' to comply with http urls standards).
 ====== set ======
 This will allow you to set values in rts2 devices. Modifiers are:
 'd': device, 'n': name, 'v': value, 'async': async
+====== status ======
+get or status are identical.
+This will give the values of a specific module. Known modifier is: 'd': device