Differences

This shows you the differences between two versions of the page.

--- skycat [2009/05/11 01:10] – pkubanek
+++ skycat [Unknown date] (current) – external edit (Unknown date) 127.0.0.1
@@ Line 3: / Line 3: @@
 This document is ment as a simple howto for installing [[http://archive.eso.org/cms/tools-documentation/skycat|ESO SkyCat Tool]] on Debian and Ubuntu systems. It surely is not comprehensive nor authoritative, it's rather the simple description of "how we did it". But it still may come in handy ;-).
-The original version from Petr Kubanek was only for Ubuntu 08.10, now it's extended to Debian 4.0 Etch and Ubuntu 09.04.
+The original version from Petr Kubanek was only for Ubuntu 08.10, now it's extended to Debian 4.0 Etch, Debian 5.0 Lenny and Ubuntu 09.04.
 ====== Downloads ======
@@ Line 14: / Line 14: @@
 <code bash>
 user@host:~$ wget http://archive.eso.org/cms/tools-documentation/skycat-download/skycat-3.0.2.src.tar.gz
-user@host:~$ sudo apt-get install tcl8.4-dev tk8.4-dev blt-dev itcl3.1-dev itk3-dev tclx8.4
+user@host:~$ sudo apt-get install tcl8.4-dev tk8.4-dev blt-dev itcl3.1-dev itk3.1-dev tclx8.4
 </code>
@@ Line 25: / Line 25: @@
 <code bash>
 user@host:~$ wget http://archive.eso.org/cms/tools-documentation/skycat-download/skycat-3.0.2.src.tar.gz
-user@host:~$ sudo apt-get install tcl8.4-dev tk8.4-dev blt-dev itcl3-dev itk3-dev tclx8.4 iwidgets4
+user@host:~$ sudo apt-get install tcl8.4-dev tk8.4-dev blt-dev itcl3-dev itk3-dev tclx8.4 iwidgets4 x11proto-xext-dev libxext-dev
 </code>
@@ Line 65: / Line 65: @@
 </code>
-  * Seems as case only for Ubuntu
+  * Seems as case only for Ubuntu and Debian 5.0 Lenny
 You need to edit //cat/generic/AstroQuery.h// and put //#include <string.h>// to it, right after //#include <cstdio>//
@@ Line 117: / Line 117: @@
   * Debian (seems to be not a problem in ubuntu?):
-There is one more problem, you have to edit these files:
+There is one more problem in these files:
   ./cat/configure
   ./rtd/configure
@@ Line 124: / Line 124: @@
   ./astrotcl/configure
-There is an error in those files, you have to change the line
+It is the redundant single quote mark (') in the end of the line:
   system=MP-RAS-`awk '{print }' /etc/.relid'`
-to
-  system=MP-RAS-`awk '{print }' /etc/.relid`
-(redundant single quote mark).
+You can use this simple pipeline to repair it all:
+<code bash>
+for i in ./cat/configure ./rtd/configure ./tclutil/configure ./skycat/configure ./astrotcl/configure; do cp $i ${i}.orig; cat ${i}.orig | sed "s/\/etc\/\.relid'/\/etc\/.relid/" > $i; done
+</code>
 ====== Make ======