https://www.rts2.org/wiki/ 2026-05-05T15:10:38+00:00 https://www.rts2.org/wiki/ https://www.rts2.org/wiki/lib/tpl/dokuwiki/images/favicon.ico text/html 2009-01-09T23:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rts2.org/wiki/doku.php?id=howto:bootes:bootes_1&rev=1231542000&do=diff How to login and check that we are observing Until we will have common web interface to display status of all our instruments, the following must be done in order to login check that Bootes 1 is observing: * login to arae (ssh -p 2222 arae.iaa.es) text/html 2008-11-17T23:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rts2.org/wiki/doku.php?id=howto:bootes:bootes_2&rev=1226962800&do=diff What blocks the dome Warning: this is obsolete, as this will be replaced by RTS2 component to drive dome. On dcm2 (ssh dcm2.mayora...) there are two files, which block the dome: - /home/standa/dcm/dcm.block - /home/standa/dcm/mrakomer.credo While the first serves only for manual blocking (echo text/html 2012-03-06T23:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rts2.org/wiki/doku.php?id=howto:bootes:bootes_3&rev=1331074800&do=diff Bootes 3 (New Zealand) Computers Provided by NZ Dell, payed by NZ, finall payment due to Spanish side * 2 rackable units (1 telescope + dome, 1 all sky) * 2 x 1 TB HDD * Quatro core Intel CPU * 4 GB of RAM * PCI extension board * about 2k EUR per unit text/html 2008-11-11T23:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rts2.org/wiki/doku.php?id=howto:bootes:bootes_ir&rev=1226444400&do=diff Dome opening and closing You cannot open dome manually using buttons in copula if rts2-dome-ir is running - check in rts2-mon IRDOME component. If you would like to operate dome manually, please switch to local mode using key on dome LED box. Bear in mind that dome will not connect properly to controlling computer if it is in local mode during cabinet boot.